A Crestview company - serving Fort Worth, TX

Tamko Underlayment & Deck Repair Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Underlayment & Deck Repair: The Fort Worth Owner’s Guide

We stock and install Tamko-compatible underlayment and deck repair materials across Fort Worth, with most standard repair jobs running $450 – $1,200 installed depending on the square footage and how much decking needs replacement. The work can typically be scheduled within a few days once we’ve inspected the damage. Most homeowners find out their underlayment has failed the hard way: a water stain on the ceiling, granule buildup in the gutters, or a soft spot on the roof deck that gives when walked on. Underlayment is the waterproof barrier between your shingles and the plywood deck below. When it fails, water gets through to the deck, and the deck starts rotting. That’s the part you can’t see until someone gets up there and lifts a few shingles.

Roofers installing new shingles during a professional residential roof replacement. nationwide

Call (682) 730-3548

Key Takeaways:

  • Tamko underlayment failures in Fort Worth usually show up as interior stains, curling shingles, or visible sagging between rafters.
  • We install Tamko’s own underlayment lines or proven equivalents matched to your existing system.
  • Written price before any work starts, and a written 365-Day Done Right Promise on every repair.

Which Tamko Models This Applies To

This page covers underlayment installed beneath Tamko shingle lines, plus the roof deck repair that goes with it. In Fort Worth, the Tamko products we see most are the Heritage, Twin Rivers, and Titan XT architectural shingle lines. The underlayment spec often gets overlooked when these roofs were originally installed, and that’s where the trouble starts. Some crews run a single layer of #15 felt and call it done. Texas heat and wind do not agree with that approach.

Tamko’s product catalog includes their own-brand synthetic underlayment, and their installation instructions specify fastening patterns and minimum lap requirements that vary by slope. If your roof has a pitch below 2:12, the underlayment requirements change entirely, and we regularly find Fort Worth homes where low-slope sections were underlaid as if they were steep roofs. That’s a compatibility gotcha worth knowing: a low-slope roof needs double coverage or membrane-grade underlayment, not standard felt. If you have the original paperwork, look for the specific underlayment listed. If not, we can identify what’s up there during the inspection by checking material thickness, weave pattern, and the condition of the deck beneath it. Aftermarket synthetic underlayment from brands like GAF, Owens Corning, and CertainTeed can be used as direct upgrades, but we won’t mix and match without confirming the existing system and local code requirements first.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your Tamko Underlayment & Deck Repair Is Failing

  • Interior water stains on ceilings or walls. This is the loudest signal. Water is getting past the underlayment and sitting on the deck long enough to penetrate. By the time you see a stain, the deck is usually already damaged.
  • Shingles that look wavy or “humped” between rafters. That’s the deck sagging underneath, which means the plywood or OSB is losing structural strength from absorbed moisture. It won’t get better on its own.
  • Granules collecting in gutters or at downspout bases. Underlayment failure accelerates shingle wear because the shingles are now dealing with moisture from both sides. Granule loss is a side effect.
  • Visible daylight in the attic. If you can see pinpoints or slivers of light through the roof deck from inside the attic, you have gaps. Underlayment is either torn, improperly lapped, or missing entirely in those spots.
  • Soft or spongy decking felt underfoot during an inspection. This is the one you won’t find yourself without walking the roof, which we don’t recommend for homeowners. It’s the fail point we check first because rotten deck means the underlayment above it has been compromised for a while.

Replacement Cost & What’s Included

Most Tamko underlayment replacement jobs in Fort Worth run between $450 and $1,200. The range is driven by three things: how many square feet of roof need to be opened up, how much decking has to be cut out and replaced, and what underlayment grade makes sense for your roof pitch and Tamko shingle line. A small repair around a chimney or pipe flashing might stay on the low end. A full section of underlayment with multiple sheets of decking replacement pushes toward the top. We don’t quote blind, and we don’t quote with “plus materials” buried in the fine print. Our written price includes the tear-off of affected shingles, the underlayment material, deck repair, re-installation, fasteners, and cleanup. If we open the roof and find more rot than expected, we stop and show you photos before anything changes. The price we give you before work starts is the price on the invoice, full stop. Every repair is covered by our 365-Day Done Right Promise, in writing, at no extra cost.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Honest answer: once underlayment has failed, the DIY window has closed. The shingles above it have to come off, the bad decking cut out, new sheathing fastened to code, and the whole assembly re-laid in the right order with the right fasteners. It’s not a one-afternoon project, and the risk of doing it wrong is a bigger leak than you started with. What a homeowner can safely check is the attic side: look for water stains, damp insulation, or visible light in the deck seams. That information helps us when you call, and it helps you decide whether this is urgent or can wait a week. Roof work on a steep pitch is not the place to learn on the job. We’ve spent years watching DIY repairs fail in Fort Worth heat because the wrong tape was used on seams, or the underlayment was run the wrong direction. If the deck is soft, the fix is a professional one. We’re glad to take the call.

FAQs

Ready to Fix Your Tamko Underlayment & Deck?

You’ve already identified the problem. Now get a written price and a plan to fix it. Call (682) 730-3548 to schedule your free inspection and estimate. We’re Crestview Roofing Co Fort Worth, an independent roofing contractor, not affiliated with Tamko, but we work with their materials every week. We answer the phone, we show up on time, and we put everything in writing.

Need Roofing help in Fort Worth? Licensed & insured · Free on-site estimates response · free estimates
Call (682) 730-3548
Local Service Coverage

Request a Free Estimate in Fort Worth

Tell us what you need - Crestview Roofing Co Fort Worth responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to being contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch