Boral Roof Repair Nationwide

Boral Roof Repair in Fort Worth: What to Know First

Boral roof repair in Fort Worth costs between $450 and $1,850 for most standard fixes, and we typically complete repairs within 3 to 7 business days of your first call. As an independent Boral service provider, Crestview Roofing Co Fort Worth handles everything from single shingle replacements to full flashing rebuilds on Boral concrete and clay tile systems. The honest answer on price is that Boral work runs higher than asphalt because the materials are heavier, the fasteners are specialized, and the labor is slower – but you shouldn’t pay more than the written quote, and with us, you won’t.

Call (682) 730-3548

If you own a Boral roof somewhere like Tanglewood, Mira Vista, or Wedgwood, this page covers how these tiles fail in North Texas weather, what repairs actually cost, and how our process keeps you from guessing. Call (682) 730-3548 for a free estimate.

How Boral Products Fail – and How We Fix Them

Boral tile is tough, but Fort Worth’s hail, heat, and clay-heavy soil create failure patterns we see repeatedly. Dylan Pace and our crew know which symptoms point to which underlying problem, and we fix the cause, not the band-aid.

• Hairline cracks in Boral Concrete Roof Tile (the most common line in Fort Worth) – These develop when tiles flex under foot traffic during past repairs or when freeze-thaw cycles push water into micro-fractures. A 2-inch crack lets water wick into the underlayment and rot the deck. We remove the damaged tile, inspect the underlayment beneath, and seat a color-matched replacement using the same profile so the roof drains like it should.
• Failed mortar at hips and ridges on Boral Clay Tile systems – Fort Worth’s summer heat expands the clay, then January freezes contract it. Mortar doesn’t flex, so it cracks loose. We repoint with a polymer-modified mortar that moves with the tile, then re-bed any loose ridge caps before they slide off.
• Leaking at vertical flashings on Boral flat-profile tile (think the Slate and Shake series) – The culprit is nearly always old step flashing that was never replaced when the Boral system went on, or caulk smeared over the tile instead of a proper metal reglet cut. We strip the tile, replace the flashing, and re-lay the tile with a 4-inch overlap. No caulk as a crutch.
• Broken or missing weather block (the bird stop under the first course) – Hail or squirrels knock these out, opening a gap where wind-driven rain gets under the tile. It looks minor, but in a Fort Worth thunderstorm it’s an open door. We cut and install new bird stop to match the original profile, then verify the eave metal still carries water into the gutter.
• Deck rot under Boral tile from long-slow leaks at valley intersections – Boral valleys collect more debris than asphalt because the tile profile channels leaves and acorns into the low point. We regularly find deck rot in the 2-foot radius around valley metal on older Fort Worth homes. We pull the affected tile, replace the damaged deck section, install new valley metal, and re-bed the tile – then show you before-and-after photos so you can see exactly what we saw.

Our Boral Roof Repair Process

Every Boral job follows the same sequence, so you know what’s happening from the first call to the final photo.

1. 1
   Call or text (682) 730-3548. A live person answers, asks what you’re seeing (leak stain, missing tile, debris in the gutter), and schedules a repair assessment.
2. 2
   Assessment and documentation. We get on the roof, photograph the damage, and identify the exact Boral tile profile and color. If we can’t match the color with a current production run, we’ll tell you before any work starts.
3. 3
   Written price. You get a line-item quote before any work begins. The number on that page is the number on the invoice. No “we found more once we got up there” unless you approve a change in writing first.
4. 4
   The repair. We use OEM Boral tile when the color and profile are still in production. For discontinued lines, we source from salvage yards that specialize in Texas tile – never a mismatched Home Depot special. Flashing and underlayment get upgraded to meet current code where we touch them.
5. 5
   Water test and photos. We run water on the repaired area for 10 minutes, then send you before-and-after photos of the work along with the digital invoice by text.
6. 6
   Your 365-Day Done Right Promise kicks in. If the repair fails within the year, we come back and fix it at no charge. That’s in writing, on every repair.

What Boral Roof Repair Costs in Fort Worth

What moves the price: tile color availability, roof pitch (steep roofs take longer), the age and condition of the underlayment beneath the repair area, and whether the damage is accessible from the eave or requires staging. We don’t add trip charges, fuel surcharges, or “tile disposal fees” after the fact. The quote covers the job. Call (682) 730-3548 for an exact written quote – estimates are free.

Why Fort Worth Homeowners Call Crestview Roofing Co Fort Worth for Boral Work

Boral roofs are a niche, and a lot of roofers treat them like an asphalt job with different shingles. We don’t. Our technicians are trained specifically on tile systems – the right fastener depth for a given underlayment, how to walk a Boral field without cracking tiles, and when a “small” tile crack means the deck beneath is already compromised. We also carry the backup of working daily with GAF, Owens Corning, and CertainTeed systems, so if your Boral roof has reached the point where repair doesn’t make financial sense, we’ll tell you straight instead of selling you patches.

Every repair comes with a written price before work starts, photo documentation before and after, a live arrival time you can track, and the 365-Day Done Right Promise. If it’s not done right, we make it right – free second visit, no negotiation. Dylan’s standing rule: put it in writing or don’t bother saying it.

FAQs