Boral Roof Replacement Nationwide

Boral Roof Replacement in Fort Worth: What to Know First

Boral roof replacement in Fort Worth typically runs between $9,500 and $18,500 for a standard single-family home, with most full tear-offs completed in three to five working days. We’re an independent Boral service provider, which means we replace Boral concrete and clay tile roofs without being beholden to any manufacturer’s sales agenda. Our pricing model is simple: you get a written number before any work starts, and that number does not move unless you change the scope yourself.

Call (682) 730-3548

If you own a Boral roof in Fort Worth and it’s reaching the end of its service life, or you’ve got cracked tiles, failed underlayment, or recurring leaks, this page will tell you what actually happens on a Boral replacement job here. We’ll walk through the failure modes we see on real Fort Worth homes, what parts cost, how the process works, and why the underlayment matters more than the tile. Call (682) 730-3548 for a free estimate.

How Boral Products Fail – and How We Fix Them

Boral makes a solid tile. But no roof product survives North Texas weather forever, and we’ve replaced enough Boral roofs across Fort Worth to know exactly where they give out. Here’s what we see on real jobs:

• Underlayment failure before tile failure. Boral’s concrete tile lines, including the Boral Centurion and Boral Saxony series, routinely outlast their underlayment. The felt or synthetic layer underneath decays after 20 to 25 years, especially under Fort Worth’s freeze-thaw cycles and 100-degree summers. The tile looks fine from the ground, but water is getting through. This is the most common trigger for a full Boral replacement. We tear off everything, inspect the deck, and install a high-grade synthetic underlayment rated for tile before the new Boral tile goes back on.
• Cracked hip and ridge tiles from hail and thermal shock. Boral’s barrel profiles, like the Mission line, look great but take a beating at the hips and ridges. Fort Worth hail storms crack the caps, and once a cap is compromised, water follows the crack line straight into the attic. We replace the damaged caps and, on older roofs, rebed and repoint the entire hip and ridge assembly rather than patching piecemeal.
• Improperly flashed valleys and sidewalls. We’ve torn off Boral roofs in neighborhoods like Tanglewood and Ridglea Hills where the original installer used low-grade flashing. After 15 years, that flashing corrodes or separates, and the leak shows up at the wall line, not the roof field. On a Boral replacement, we repurpose the best of the existing tile and replace every piece of flashing with code-rated metal, properly woven into the underlayment system.
• Soft decking under the tile. Boral tile is heavy. When a deck board rots underneath, the tile above it settles, shifts, or cracks. We find this constantly on Fort Worth homes built in the 1990s with original Boral roofs. Our process includes walking the entire deck after tear-off and replacing any compromised sheathing before the new underlayment and tile go down. You see photos of this before we cover it back up.
• Fastener fatigue on battens. Boral tile installs on batten systems, and those battens are only as good as the fasteners holding them. On homes near Eagle Mountain Lake or along the Trinity River, humidity corrodes standard fasteners faster than inland homes. We upgrade to stainless or high-grade coated fasteners on every Boral replacement in Fort Worth, because the last thing you want is a batten separating from the deck five years in.

Our Boral Roof Replacement Process

Dylan Pace and our crew have replaced Boral roofs across Fort Worth for years, and the process is the same every time: no shortcuts, no surprises, and a paper trail on everything.

1. 1
   Call and book your estimate. A live person answers at (682) 730-3548. We schedule a walkthrough, and you’ll get a live arrival time you can track, per The Relay Standard.
2. 2
   Roof inspection and photo documentation. We inspect the tile, underlayment, flashing, decking, and ventilation. You get photos of everything we find.
3. 3
   Written price before any work starts. No verbal ballparks that “might change.” We put the number in writing, and that’s the number on the invoice unless you add scope.
4. 4
   Tear-off and deck repair. We remove the old Boral tile and underlayment, inspect the deck, and replace any soft boards. You get photos before we cover it.
5. 5
   New underlayment, flashing, and Boral tile installation. We install a tile-rated synthetic underlayment, new flashing, and then the Boral tile, battens, and caps. Every layer gets photo-documented.
6. 6
   Final walkthrough and your guarantee. We walk the property with you, confirm everything is correct, and issue your written workmanship guarantee. Every Boral replacement we do is covered by our 365-Day Done Right Promise: if something isn’t right within a year, we fix it at no charge.

What Boral Roof Replacement Costs in Fort Worth

Here are honest ranges for Boral replacement work on typical Fort Worth homes. These are for planning purposes, not a substitute for a written quote:

• Full Boral tile replacement (1,800 – 2,500 sq ft home): $11,000 – $18,500, depending on tile profile, deck repairs, and accessibility.
• Underlayment replacement with tile re-install (tile in good shape): $6,500 – $10,000.
• Hip and ridge cap replacement only: $1,400 – $3,200.
• Decking replacement (per 4×8 sheet): $85 – $140, installed.

What moves the price: the condition of your decking, whether you have a two-story or steep-pitched roof, the Boral tile profile you choose (Mission barrel tile costs more than flat Saxony profiles), and whether we’re doing a complete re-flash. Call (682) 730-3548 and we’ll give you a written number specific to your roof.

Why Fort Worth Homeowners Call Crestview Roofing Co Fort Worth for Boral Work

Most roofers in Fort Worth will replace any shingle you point at. A Boral roof is a different animal. It’s heavy, it requires a tile-rated underlayment, and the battens and fasteners have to be right or the whole system fails early. We’ve done enough Boral work to know the difference between a roof that looks good on installation day and one that still looks good ten years later.

Every job we do carries the 365-Day Done Right Promise: if a covered repair or installation fails within a year, we come back and fix it at no charge. That’s in writing, on every job, no negotiation. And because we also install GAF, Owens Corning, and CertainTeed products, we’re not going to push you toward a brand that doesn’t fit your home. If Boral tile is the right call, that’s what we’ll tell you. If a high-quality composite alternative makes more sense for your budget, we’ll tell you that too. Put it in writing or don’t bother saying it.

FAQs