Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Installation in Fort Worth: What to Know First
Boral roof installation in Fort Worth typically runs $12,500 to $28,000 depending on the tile or stone-coated steel line you choose, with most full replacements finishing in 5 to 10 working days. We’re an independent Boral service provider, which means we install the product correctly and stand behind the labor ourselves. Put it in writing or don’t bother saying it, that’s how we quote every Boral job in Fort Worth.
This page is for homeowners who’ve already decided on Boral, or who want straight answers about whether it’s the right roof for a North Texas climate. If you’re pricing a Boral installation in Fort Worth, call (682) 730-3548 and we’ll walk you through real numbers for your specific roofline.
Key Takeaways
- Boral tile and stone-coated steel installations in Fort Worth run $12,500 to $28,000, with most homes landing between $16,000 and $22,000.
- We install all major Boral product lines, including the concrete tile series and the stone-coated steel lineup.
- You get a written price before work starts, photo documentation, and a live trackable arrival time under The Relay Visibility Guarantee.
- Every Boral installation we complete carries the 365-Day Done Right Promise in writing.
- We’re an independent installer, not a Boral-authorized dealer, so our loyalty is to the homeowner, not the manufacturer’s sales quota.
Styles & brands we work with
How Boral Products Fail and How We Fix Them
Boral makes a solid product, but no roof is bulletproof in Fort Worth. Here’s what we actually see on Boral jobs in this market, including the failure modes that don’t show up on the manufacturer’s website.
- Concrete tile efflorescence on the Boral Barcelona and Capistrano lines. Fort Worth’s hard water, combined with our freeze-thaw cycles, can pull mineral salts to the surface of concrete tiles, leaving white streaks. This is cosmetic in most cases, but if the tile is also absorbing water, it’s a freeze-crack risk. We assess each tile’s moisture uptake before deciding whether to clean and seal or replace individual tiles.
- Undereave closure gaps on tile profiles with deep fluting. Boral’s more sculpted tile shapes, like the Villa and Mission lines, can leave wider gaps at the eave line if the installer doesn’t use the right closure system. Squirrels and birds find those gaps before you do. We install custom-cut closures and verify the eave line from the attic side during every tile job.
- Stone-coated steel chipping at fastener points. On Boral steel products, the stone chip coating can be damaged if an installer overdrives screws or uses an impact driver without a depth clutch. The chip damage exposes the steel substrate, and North Texas humidity does the rest. We use depth-controlled fastening and touch-up coating on every exposed fastener head.
- Underlayment degradation under tile in shaded sections of the roof. Tile can last 50 years, but the underlayment beneath it will not. On Fort Worth homes with heavy tree cover, we regularly pull tile after 15 to 18 years and find the felt or synthetic underlayment has degraded in the shaded valleys and north-facing slopes. We recommend a total underlayment replacement and tile re-set rather than spot patching when we see this pattern.
- Valley flashing corrosion where tile meets metal. The contact point between Boral tile and valley flashing is a corrosion weak point, especially if the original installer used aluminum flashing instead of galvanized or stainless. We remove the tile in the valley, inspect the flashing, and replace it with a heavier-gauge product before re-bedding the tile.
Our Boral Roof Installation Process
Here’s how a Boral installation with Crestview Roofing Co Fort Worth actually goes, from first call to final invoice.
- 1
Call and scheduling. A live person answers, day or night. We book a site visit and send you the technician’s name before they arrive.
- 2
Site assessment and measurements. We measure every roof plane, check the deck from the attic, and photograph the existing condition. You get those photos.
- 3
Written price and scope. You receive a line-item quote before any work starts. The number on the quote is the number on the invoice.
- 4
Tear-off and deck inspection. We remove the old roofing and inspect the deck boards. Any soft or damaged decking is documented with photos and brought to your attention before we proceed.
- 5
Boral installation. Underlayment, flashing, and then the Boral product, installed to the manufacturer’s specifications and our own quality checks at three stages.
- 6
Final inspection and documentation. We walk the roof with you, provide before-and-after photos, and send a digital invoice by text. Your 365-Day Done Right Promise is in writing before we leave.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Installation Costs in Fort Worth
Real numbers, because you should know before you call.
- Boral concrete tile (Barcelona, Capistrano, Villa lines): $14,000 to $24,000 for a typical 2,000 to 2,600 square foot Fort Worth home, including tear-off, underlayment, and installation.
- Boral stone-coated steel (full replacement): $16,500 to $28,000 depending on the roof’s complexity, pitch, and number of valleys.
- Partial Boral tile replacement or repair: $900 to $3,500 for localized work, depending on how many tiles and whether underlayment replacement is involved.
- Underlayment replacement and tile re-set (existing Boral tile): $6,000 to $11,000 for a full roof re-bed without replacing tile.
What moves the price: roof pitch (steeper roofs cost more per square), access (tight lots or second-story work), the number of penetrations like vents and skylights, and whether the existing deck needs replacement. Steep cut-up roofs in neighborhoods like Monticello or Tanglewood run higher than a simple ranch in Wedgwood. Call (682) 730-3548 for a free estimate with real numbers for your roof.
Why Fort Worth Homeowners Call Crestview Roofing Co Fort Worth for Boral Work
Dylan Pace started this company because he got tired of watching homeowners get quoted one number and billed another. That’s why every Boral installation we complete in Fort Worth starts with a written price and ends with a digital invoice that matches it. You’ll know who’s coming to your door, when they’ll arrive, and what the work will cost before we ever set foot on the property.
We work on Boral because we know the product’s strengths and its weak points, and we don’t pretend otherwise. We also install GAF, Owens Corning, and CertainTeed, which means if Boral isn’t the right fit for your home’s structure or budget, we’ll tell you that instead of selling you a roof you don’t need. The 365-Day Done Right Promise covers every installation we complete, in writing, including a free second visit if anything fails within the year. Calls are answered by a live person around the clock.
FAQs
Boral’s product warranty covers the materials themselves, not the labor or installation. As long as the tile or stone-coated steel is installed per Boral’s published specifications, your manufacturer’s warranty remains intact. We follow those specifications to the letter, and we document the installation with photos so you have a record if a material claim ever arises.
Yes, we match Boral tile by the product line, profile, and color code printed on the back of each tile. Boral stamps their tiles with a plant code and color identifier, so we can source the exact match even if the original tile was produced years ago. For discontinued colors, we recommend a full roof replacement or a strategic re-roof of one elevation to avoid visible color banding. Call (682) 730-3548 and we’ll identify your tile before we quote.
Most full Boral tile installations in Fort Worth take 5 to 10 working days. Stone-coated steel runs 3 to 7 working days. Weather is the biggest variable in North Texas, and we’ll tell you the honest timeline after we see the roof, not before. You’ll get photo updates and we’ll communicate any weather delays as they happen.
Boral concrete tile weighs roughly 9 to 11 pounds per square foot installed, which is heavier than asphalt shingle but within the structural range of most Fort Worth homes built after 1990. We check the truss spacing and load capacity before recommending tile, and if the structure can’t handle it, we’ll say so and recommend stone-coated steel instead. Your roof deck should never be someone’s guess.
Yes. We pull all required permits with the City of Fort Worth and schedule inspections as required by code. Every Boral installation we complete is inspected and passed before we consider the job done, and you’ll have written documentation of both the permit and the inspection.
Get Your Boral Roof Installation Estimate
If you’re ready to price a Boral roof installation in Fort Worth, call (682) 730-3548. We’ll give you a written price, a real timeline, and the name of the technician who’ll be on your roof. No four-hour windows. No surprise change orders. Just straight answers and a roof that’s installed right.
Written by Dylan Pace, Owner, Crestview Roofing Co Fort Worth at Crestview Roofing Co Fort Worth, serving Fort Worth and nearby areas.