Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Installation Across Azle
Roof installation in Azle runs anywhere from $9,200 to $28,000 for most single-family homes, with ranch-style homes from the 1960s and 1970s usually landing on the lower end and larger lakeside properties off FM 730 pushing toward the top. The price gets set by tear-off needs, roof pitch, and whether your lot falls under Azle city permits or Parker and Tarrant County jurisdiction. Dylan Pace and our Roof Installation crew scope every job the same way: we walk the property, check the septic and well setbacks, measure the roof, and hand you a written number before anything gets torn off. Call (682) 730-3548 to set up that walkthrough.

Why Crestview Roofing Co Fort Worth Is Azle’s Preferred Roof Installation Company
Azle is split between Parker and Tarrant counties, and that line is not academic, it changes who inspects your roof and what they look for. We know it because we’ve pulled permits on both sides. A home off Jacksboro Highway in the city limits goes through Azle’s municipal process for any Azle Roof Replacement. A ranch house down a gravel lane off Silver Creek Road? That’s Tarrant County, and the inspector wants photo evidence of ice and water shield at the eaves before you even lay the starter strip. We document all of it because insurers in hail alley get picky after a storm.
We also run a background-checked crew that shows up with a name and a live arrival time you can track, so you’re not sitting on a four-hour window wondering if anyone is coming. The Relay Visibility Guarantee sits behind every job: written price first, before-and-after photos, digital invoice by text. No price balloons at the door. Dylan founded this company in 2000, and the standard now is the same one he set then: the number on the page is the number on the invoice.
Styles & brands we work with






Roof Flashing Installation in Azle
Roof flashing installation in Azle usually runs $600 to $2,400 depending on how many penetrations or transitions your roof has, and on acreage homes that means chimneys, vent pipes, skylights, and the long wall lines where a shop or detached garage ties into the main house. Flashing, the metal strips that seal joints around chimneys and vents, is the first place a North Texas roof fails. Hail does not always tear shingles off. Sometimes it just dents the flashing and breaks the sealant. Then a gully-washer hits and water tracks inside the wall.
Chimney and vent flashing on ranch homes
Original 1960s ramblers around Castle Hill and the county pockets east of Azle almost always have galvanized flashing that has outlived its sealant. We cut the old metal back, install new step flashing at the chimney shoulders, and run ice and water shield under the shingle courses before re-laying. If you smell mildew near the fireplace in July, the flashing is probably the culprit.
Shop and outbuilding transitions
Homes on acreage around Azle often have a detached shop or barn that ties into the house roof at a valley or rake edge. Those transitions get flashed poorly from the start, or the metal gets bent by wind-driven debris. We flash them with the same material we use on the house, then photo-document the finished tie-in so your insurer has a record before the next hailstorm.
TPO Roofing Installation in Azle
TPO roofing installation in Azle typically runs $7,500 to $15,000 for a low-slope section or a full flat roof on a shop, carport, or a mid-century addition, with the higher number tied to full tear-off and new insulation board. TPO is a single-ply membrane that gets heat-welded at the seams, and it handles the standing water that sits on low-slope roofs after a Tarrant County downpour better than rolled asphalt ever did. A lot of Azle homes built in the 1970s have those shallow-pitch additions over patios or converted garages. Rolled roofing has done its time there, and TPO is the better 25-year answer.
Low-slope additions and sunrooms
If the roof slope is under 2:12, shingles will leak. They are not rated for standing water. We swap that section to TPO, run the membrane up the tie-in wall, and terminate it with a metal edge. On an acreage home with no municipal inspection, we photograph the seam welds and the curb flashings so you have a record no different from one the county would accept.
Detached shops and carports
You do not want a shingle roof on a detached shop that holds a two-post lift or a classic truck. The wind gets under a shallow-pitch shingle roof and peels it in layers. TPO goes down mechanically fastened, with heat-welded seams that do not rely on sealant, and it reflects the North Texas sun instead of soaking it up. That matters when your shop has no climate control and your tools rust in August humidity.

Trusted Brands We Service in Azle
We install GAF, CertainTeed, and Owens Corning roof systems, and we stock common flashing, vent, and TPO accessory parts for those brands so an Azle job does not stall for a shipment. GAF architectural shingles are what we put on the Silver Creek Road ranch mentioned earlier. CertainTeed’s Landmark line hold up well in the hail belt when paired with a raised wind-nailing pattern. And Owens Corning makes a TPO membrane that has held up on low-slope Azle additions we’ve installed over the past several years. For Azle homeowners, that means you get a manufacturer-backed system, not a mix of random parts from a supply-house bin.
Common Roof Installation Problems We See in Azle Homes
- Tear-off trailers crushing septic laterals. On acreage homes the drain field lines are often unmarked, sitting just under the grass along the easiest equipment path. We locate the septic field before staging any trailer, and we use the shortest safe route from the driveway to the roof edge.
- Skipped ice and water shield at the eaves. Low-slope 1960s ramblers around Briarwood and Silver Creek collect runoff at the gutter line. If the original roof never got a proper eave membrane, the first spring gully-washer sends water under the shingle edge and down the fascia. We install ice and water shield on every low-slope eave we strip.
- Standard four-nail patterns on wind-exposed ridges. Lakeside homes near Eagle Mountain Lake sit on open ridges where gusts regularly clear 110 mph. A standard four-nail shingle pattern will not hold architectural shingles at that exposure. We quote six-nail raised patterns on those stretches because wind codes updated, and insurers now ask for it.
- Old flashings against outbuildings left untouched. If a shop or detached garage ties into the house, the flashing at that transition gets corroded or bent and nobody notices until a wall stain shows up. We flash every tie-in on the property during a full roof install, not just the main house.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Installation in Azle, TX
Most whole-roof installations in Azle land between $9,200 and $28,000. A 1,600-square-foot ranch home with a straight gable roof and a simple tear-off will run closer to the $11,000 to $15,000 range with architectural shingles. Add a low-slope TPO section over an addition? Expect $2,000 to $4,500 more. A lakeside home with a steep pitch, six-nail wind pattern, and multiple valleys will push past $20,000. County permitting on acreage does not skip documentation, it changes who verifies the work, and we still photograph every layer. The factors that shift the number are roof pitch, decking condition, how much flashing and metal is needed, and the safe staging distance from your septic and well. Call (682) 730-3548 and we’ll give you a written line-item estimate before any work is scheduled.
We Also Serve Cities Near Azle
Our crews handle roof installation in Azle and regularly run jobs into Keller, Haltom City, Fort Worth, and Southlake. If your property sits just across the Azle city line, the same permitting questions apply, and we already know which county office to call. Call (682) 730-3548 and we’ll figure out the jurisdiction before we quote the job.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Azle
If your parcel sits outside the Azle city limits, the permit and inspection typically fall under Parker or Tarrant County, not the city. That changes what gets inspected: county reviews focus on the structural and code layers, but they may not send an inspector the same way Azle does. We handle the paperwork either way, and we photograph the underlayment, flashing, and nailing patterns so no layer goes undocumented. Call (682) 730-3548 and we’ll confirm which jurisdiction applies to your address before quoting.
We keep heavy equipment off the drain field and at least 10 feet from any wellhead, which means on some acreage lots the tear-off trailer and shingle bundles stage along the driveway instead of the grass. On the Silver Creek job, we ran the trailer between the owner’s septic laterals and a two-story shop, using the existing gravel drive and a loader path that did not cross the leach field. If access is tight, we haul bundles by hand for the last stretch. Call (682) 730-3548 and we’ll scope the access before we quote so the price reflects the actual equipment path.
Those low-slope, original ramblers need ice and water shield along the eaves and in the valleys, not just a felt underlayment, because the runoff concentrates at the gutter line and finds every old seam. We also replace the galvanized step flashing at chimneys and the rakes, because after 50 or 60 years the sealant is gone and the metal has started to pit. Most of these homes get architectural shingles over the original 3-tab, but only after the decking gets checked for rot at the eave edges. Call (682) 730-3548 for a roof-by-roof answer on your specific house.
Because the ridgelines and open exposure along the west side of Eagle Mountain Lake see gusts above 110 mph, and updated wind codes require a six-nail raised pattern on shingles in those zones, not the standard four-nail pattern used inland. Insurers in the hail belt have started asking for photo proof of that nailing pattern after a claim. We quote it up front rather than surprising you with a change order after the deck is stripped. Call (682) 730-3548 and we’ll tell you if your lot falls into that exposure zone.
Yes, we tear off the old layer first. Nailing architectural shingles over a deteriorating 3-tab roof hides decking rot, puts the new roof’s warranty at risk, and leaves you with a double layer that traps heat and moisture. On acreage homes in Parker and Tarrant counties, the old layer also hides holes from years of hail strikes. We strip to the decking, repair what is bad, and start with a clean surface. Call (682) 730-3548 for a written tear-off and install estimate.
Call Crestview Roofing Co Fort Worth for Your Azle Roof Installation
We serve all of Azle, from the lakeside stretches off FM 730 to the county acreage down Silver Creek Road and the 1960s ramblers around Briarwood and Castle Hill. Dylan Pace and our Roof Installation crew will walk your property, map the septic and well clearances, check the pitch and decking, and hand you a written price before anything gets touched. Every job includes The Relay Visibility Guarantee: live trackable arrival, before-and-after photos, and a digital invoice sent by text. We take calls 24/7 with a live person. Reach us at (682) 730-3548 to schedule your free estimate.
Written by Dylan Pace, Owner at Crestview Roofing Co Fort Worth, serving Azle since 2000.