Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Installation Across Kennedale
A full roof installation in Kennedale runs $8,500 to $22,000 for most single-family homes, depending on square footage, decking condition, and the shingle or metal system you choose. That’s the honest range before any surprises get added on site. The bigger wildcard on older Kennedale ranch homes is what we find under the old shingles, and we’ll get to that below. If you’re pricing a roof because yours took hail or is past its useful life, call (682) 730-3548 for a written estimate with a real dollar figure, not a ballpark that changes at the door.

Kennedale’s housing stock is its own animal. Blocks of 1970s ranch homes sit next to 2000s suburban builds, and each one fails differently. We know the difference because we spend our days driving Mansfield Highway, Little School Road, and Kennedale Parkway looking at roofs. That local time matters when you’re deciding between a patch and a full replacement.
Why Crestview Roofing Co Fort Worth Is Kennedale’s Preferred Roof Installation Company
Crestview Roofing was founded in 2000, and we work under The Relay Visibility Guarantee: a written price before any work begins, before-and-after photo documentation, a live trackable arrival time, and a digital invoice sent by text. No other Kennedale roofer puts those four promises in writing on every job. That’s the whole point of what we do.
Dylan Pace leads our team, and he’s built the company around a simple standard: the number on your quote is the number on your invoice. We put that in writing before a single shingle comes off. Our crews are background-checked and uniformed, so when the truck pulls up on a Kennedale street, you know exactly who’s getting out. A live person answers our phones 24/7. Not a voicemail loop. A person.
We carry GAF, CertainTeed, and Owens Corning materials and install to manufacturer spec every time. On Kennedale’s older homes, that spec often triggers a decking discussion, and we’ll walk you through it before any work starts. We don’t bury cost surprises in the fine print. We point them out during the estimate and write them into the contract so you approve them in advance. That’s the Crestview difference.
Styles & brands we work with






Standing Seam Metal Roof in Kennedale
A standing seam metal roof in Kennedale is the long-game play for homeowners tired of replacing shingles every storm season. These systems use continuous vertical panels with concealed fasteners, which means no exposed screws or nails to back out under North Texas wind. On a typical 1,800-square-foot Kennedale ranch, a standing seam install runs $24,000 to $41,000, including tear-off, underlayment, and decking repairs where needed. It’s the most expensive option up front and the last roof you’ll likely buy.
Why It Handles Kennedale Hail Better
Hail dents metal. It doesn’t crack it. Where a three-tab shingle absorbs impact and cracks at the seal line, a 24-gauge standing seam panel takes the hit and keeps shedding water. After a storm sweeps through Kennedale’s older neighborhoods, the metal roofs are the ones that don’t file claims. That’s not a sales line. That’s what insurance adjusters see every spring.
Code Considerations on Older Ranches
If your pre-1980 home has 3/8-inch plywood decking, a standing seam install will likely require a decking upgrade to meet current fastener pull-out requirements. Metal panels are heavier and need solid substrate to anchor properly. We’ll flag that during the estimate, write it into the scope, and you approve the number before we start. No mid-job phone calls with bad news.
Tile Roof in Kennedale
A tile roof in Kennedale is a statement, but it’s also a practical choice for specific homes. Concrete tile runs $18 to $28 per square foot installed, which puts a full tile roof on a 1,800-square-foot Kennedale home at $32,000 to $50,000. That’s the top of the range because the structure has to support the weight. Many of Kennedale’s older ranch homes were never engineered for tile, so we’ll check the framing and roof deck before quoting you a realistic number.
When Tile Makes Sense Here
Tile shines on newer Kennedale homes built with more complex roof designs, where the aesthetic adds real curb appeal. It also laughs off hail and wind in a way asphalt can’t. But it’s not for every house. If your ranch home’s roof framing is on 24-inch centers, tile likely won’t work without structural reinforcement. We’ll tell you that on the first visit, not the third.

What Tile Requires Underneath
Tile roofs in Kennedale need a high-temperature-rated underlayment and proper flashing at every penetration, because tile sheds water but isn’t waterproof on its own. We see a lot of badly installed tile jobs on the city’s bigger custom homes, usually where a cheaper crew skipped the underlayment. The tiles look great for two years, then the leaks start in the valleys. We install the full system, not just the pretty top layer.
Trusted Brands We Service in Kennedale
Crestview Roofing installs and repairs using manufacturer-backed materials from GAF, CertainTeed, and Owens Corning, plus metal systems from Boral and others when the job calls for it. We stock common shingle colors and accessories for Kennedale homes, so a roof install doesn’t stall waiting on a parts order from Dallas. When you call us about a project on Little School Road or a new build off Kennedale Parkway, we can usually start within a week. The material quality is never the question. The installation quality is, and that’s where we put our reputation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Installation Problems We See in Kennedale Homes
- Pre-1980 original composition shingles that look intact but aren’t. After repeated hail impacts, the old three-tab seal lines fail silently. The shingles lie flat, but water’s getting underneath and rotting the decking below. We find this on ranch homes across Kennedale every spring.
- Cheap builder-grade shingles on newer homes curling at the eaves. Builders often skip drip edge to save money, which lets water wick into the fascia and soffit. Five to eight years in, the shingles curl and the wood starts to rot. A replacement should include proper drip edge and starter strip every time.
- Re-covered roofs hiding rotten decking. Older low-slope roofs in Kennedale’s ranch stock were often re-covered instead of torn off. That second layer of shingles hides failed flashing and soft spots that only reveal themselves after tear-off. By then, you’re mid-project and facing a decking bill you didn’t plan for. We plan for it.
- Missing ice and water shield at eaves and valleys. North Texas building codes require ice and water shield in critical zones, but older homes installed before the code update don’t have it. When we strip an older Kennedale roof, adding this barrier is required to pass inspection, not optional. It’s a few hundred dollars that prevents thousands in water damage.
Pricing for Roof Installation in Kennedale, TX
A straightforward architectural shingle roof on a Kennedale home with sound decking runs $8,500 to $14,000 for a typical 1,600 to 2,000-square-foot ranch. If your roof was built before 1980 and still has the original decking, add $95 to $140 per square for the plywood replacement and code-required upgrades, which comes out to roughly $2,500 to $4,500 on a standard roof. Tile and standing seam push the total into the $24,000 to $50,000 range depending on structure and material. Those are real numbers from jobs we’ve done on Kennedale streets, not internet averages. Call (682) 730-3548 and we’ll put a written price in your hand before any work starts.
We Also Serve Cities Near Kennedale
Beyond our Roof Installation work across the metro, we handle Roof Installation in Kennedale and the surrounding communities. If you’re in Fort Worth, Crowley, Haltom City, or Euless, the same written-price guarantee and 365-Day Done Right Promise apply. Scheduling is coordinated from the Dallas-Fort Worth brand office, and crews serve Kennedale locally. One phone number covers it all.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Kennedale
A pre-1980 Kennedale home commonly has 3/8-inch plywood or spaced board sheathing that doesn’t meet current fastener pull-out requirements, so decking replacement is likely and typically adds $95 to $140 per square to the job. Newer homes built to modern code usually don’t need full decking replacement, only spot repairs around penetrations and valleys. We inspect the decking during the estimate and write any required replacement into the contract so you approve it before we start. Call (682) 730-3548 for a free estimate that includes a decking assessment.
Yes, when we pull a permit for a roof installation on an older Kennedale home, the inspection will require ice and water shield at eaves, valleys, and roof penetrations, which most pre-1980 homes lack. That requirement adds roughly $500 to $900 depending on roof complexity and eave length. It’s not optional and it shouldn’t be skipped; the barrier is what keeps wind-driven rain from getting under your shingles and into the decking. We include it in every Kennedale quote so the inspection passes clean the first time.
A square is roofing shorthand for 100 square feet of roof surface, so a 2,000-square-foot Kennedale ranch typically has 20 to 26 squares depending on slope and overhangs. When we quote a tear-off at $95 to $140 per square for decking replacement, that number multiplies by the total squares, not the home’s floor area. Understanding this keeps you from being surprised when a quote line item reads $3,800 for decking on a 24-square roof. We break every line item down in plain numbers so you can check the math yourself.
You can upgrade to architectural shingles without replacing the decking only if the existing decking meets current thickness and fastener pull-out standards, which most pre-1980 Kennedale homes fail. If your decking is 3/8-inch plywood, the heavier architectural shingles require a nail that won’t hold reliably in that substrate, so a code-compliant install triggers decking replacement first. On the bright side, architectural shingles like GAF Timberline HDZ typically last 25 to 30 years versus 15 to 20 for three-tab, so the upgrade pays for itself in the long run. We’ll show you both options with real prices before you decide.
You need a written inspection from a licensed roofer and ideally an insurance adjuster’s assessment, but the telltale signs on Kennedale homes are granule loss in the gutters, circular impact marks on the shingles, and soft spots in the decking when you press from the attic side. On older three-tab roofs, hail often breaks the seal line without visible damage from the ground, so the roof looks fine while it’s compromised. After a major storm, we inspect the entire roof surface and document every impact with photos, then we’ll tell you honestly whether you need a full replacement or targeted repairs. Call (682) 730-3548 and a live person will schedule your inspection.
Written by Dylan Pace, Owner at Crestview Roofing Co Fort Worth, serving Kennedale with written-price roofing since 2000.